personal medical alert system
In order to install the First Alert 2 in 1 Z Wave detector, you need to take the mounting bracket and fix it to either the ceiling or the wall using the provided screws don’t mount it in the corners of the room and keep a minimum of 5 feet from any cooking appliances, since the air currents carrying the cooking smoke could get to the smoke sensor, thus triggering unwanted alarms. Afterwards, attach the smoke and CO detector to the mounting bracket by twisting the device into place depending on the spot where you want to install it, you may need to take additional steps to prevent any unauthorized removable – you can lock the battery compartment and/or the detector using the locking pins. As you know, the smoke alarms use two types of sensors to detect any life threatening emergencies: the ionization sensors to detect fast burning fires and the photoelectric sensors to detect fires in their early stages smouldering fires. The ionization sensor uses a chamber filled with ionized air and, when smoke enters it, the sensor triggers the alarm. Because of its nature, the ionization sensor tends to be more sensitive at detecting small particles, therefore more often triggering false alarms. The First Alert 2 in 1 steered clear of the ionization sensor and only went for the photoelectric type.